home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
mods
/
cellular
/
fujitsu1.txt
< prev
next >
Wrap
Text File
|
1993-04-16
|
4KB
|
100 lines
FUJITSU 11X, COMMANDER ST, FX, DX, XL, PORTABLE COMMANDER, POCKET COMMANDER
STYLUS AND PCX.
NOTES: These units have four NAMS.
New units will remain locked until programed.
Portable models can not be programed with booster kit attached.
Fujitsu: 1-800-424-1500
NAM 1 programing:
1: Turn on power.
2. Confirm unit is locked, if not press F + * (LOCK).
3. Turn power off and on again. Press #626#7764726, this spells
#NAM#PROGRAM on the keypad. This code must be entered within
ten seconds of power up.
4. You will hear a continuous tone once the above step has been
completed. Hold down the * key during this tone. The tone
becomes intermittent. Continue to hold * until the tone
stops.
5. You are now in program mode, the phone will display the NAM
program step number and the data for that step.
6. The STOR key stores and increments each step.
7. After entering all the parameters you can scroll through your
entries by pressing STOR, once you are happy with all the data
press SEND to complete and exit programing.
8. If all data has been entered correctly the phone will wake
up in the locked mode. Enter the 3 or 4 digit lock code.
9. If any data was entered incorrectly the phone will emit a
short high tone. Scroll thru ALL entries to confirm, then
press SEND again. NOTE: Even if only one step is incorrect
you must step thru all entries for the phone to recycle when
you press SEND.
TO PROGRAM NAMS 2 THRU 4:
1. With phone powered up and unlocked press F+7+N where N = the
NAM number 2, 3 or 4.
2. Lock the phone. (F+*)
3. Program the additional NAM(S) by following the above
procedures from step 3.
PROGRAMING DATA:
STEP # # OF DIGITS/RANGE DESCRIPTION
01 00001-32767 SYSTEM ID
02 0 OR 1 LOCAL USE MARK
03 0 OR 1 MIN MARK
04 10 DIGITS MIN (AREA CODE & PHONE NUMBER)
05 00-15 STATION CLASS
06 0333 OR 0334 INITIAL PAGING CHANNEL
07 2 DIGITS ACCESS OVERLOAD CLASS
08 0 OR 1 PREFERRED SYSTEM
09 2 DIGITS GROUP ID (10 FOR USA)
10 3 OR 4 LOCK CODE
11 1 - 4 CALL TIMER
1 = user changeable, timer off.
2 = 6 second increments.
3 = 30 second increments.
4 = 60 second increments.
12 1 - 4 LOCK MODE
1 = user changeable, manual lock, no
outgoing calls.
2 = manual lock, no incoming or
outgoing calls.
3 = Auto lock, no outgoing calls.
4 = Auto lock, no incoming or
outgoing calls.
13 1 - 5 CALL RESTRICTION MODE
1 = No restriction.
2 = No memory access.
3 = No long distance.
4 = 2 & 3 combined
5 = Memory dialling only.
14 0 - 32767 SIDH INHIBIT
15 0 - 32767 SIDH INHIBIT
16 0 - 32767 SIDH INHIBIT
NOTES:
The ST model does not have SIDH inhibit and will return to step
01 having completed step 13.
Some newer models have more than three SIDH INHIBIT steps.
LOCK: F LOCK. UNLOCK: Three or Four digit code.
SYSTEM SELECT: F11 = A/B, F12 = B/A, F13 = A ONLY, F14 = B ONLY,
F15 = HOME ONLY